WELCOME
The Stainless 24 isn't some factory line kit. It's the sum of late night ideas, broken prototypes, and guys who know when a link is too long. Started with the idea of a forward biased angled skid. Now it's forward, low, stainless, and adjustable—four revisions and customer input led us to where we are now.
You won't find bells on it. You will find clearance, balance, and the freedom to set your wheelbase until your body fits flawlessly and your truck performs. That's what we care about: letting you build whatever you want and knowing it will perform.
What is
The Stainless 24?
The Stainless 24 is an SCX24 based performance chassis system. It uses a carrier bearing to move the rear driveshaft out of the way for more clearance. It comes standard with short and long front and rear links, allowing you to build 155-172mm from the same kit.
​
Stainless 24 kits include:
The Plate (All chassis rails and links come in 1 plate, parts ready to pop out)
3D Printed parts (Skid, sliders, body hinge, chassis supports and body mount) Carrier bearings and shaft, hardware w/nuts, 4x threaded and 12x regular pivot balls with o-rings, and of course stickers and a card!
​
What is
The Stainless Class 1?
The Stainless Class 1 is your flat skid competitive chassis option. It comes Black Nitride Coated and is 40% stronger than standard Stainless. To learn about Black Nitride coatings click here.
In standard stainless fashion it comes with short and long front and rear links. This time taking your buildable wheelbase from 140-155mm.
These Class 1 legal chassis do not use a carrier bearing. By simply angling the transmission on the skid we were able to keep major clearance in the rear while keeping the motor low and forward. This is a big win for anyone wanting to compete in class 1.
If your local C1 rules say you must have a chassis mounted bumper the kit comes with a simple pair of mounts so you can run a bumper and adjust position for the perfect placement.
​
The Stainless Class 1 Includes:
- The Plate (Chassis rails, links, optional bumper mount)
-Prints (Skid, sliders, body hinge, body mount and chassis braces)
-Hardware w/nuts, 4x threaded and 12x regular pivot balls with o-rings.
​
The Stainless 24 BLACKOUT is the same chassis system as the Stainless 24, it comes Black Nitride Coated and is 40% stronger than standard Stainless.
To learn about Black Nitride coatings click here.
​​​
It still uses a carrier bearing to move the rear driveshaft out of the way and comes standard with short and long front and rear links, allowing you to build 155-172mm from the same kit.
​​
Stainless 24 BLACKOUT kits include:
The Plate (All chassis rails and links come in 1 plate, parts ready to pop out)
3D Printed parts (Skid, sliders, body hinge, chassis supports and body mount) Carrier bearings and shaft, hardware w/nuts, 4x threaded and 12x regular pivot balls with o-rings, and of course stickers and a card!
